Luminol

src: img00.deviantart.net

Luminol (C₈H₇N₃O₂) is a chemical that exhibits chemiluminescence, with a blue glow, when mixed with an appropriate oxidizing agent. Luminol is a white-to-pale-yellow crystalline solid that is soluble in most polar organic solvents, but insoluble in water.

Forensic investigators use luminol to detect trace amounts of blood at crime scenes, as it reacts with the iron in haemoglobin. Biologists use it in cellular assays to detect copper, iron, and cyanides, as well as specific proteins by western blot.

When luminol is sprayed evenly across an area, trace amounts of an activating oxidant make the luminol emit a blue glow that can be seen in a darkened room. The glow only lasts about 30 seconds, but investigators can document the effect with a long-exposure photograph. Crime scene investigators must apply it evenly to avoid misleading results, as blood traces appear more concentrated in areas that receive more spray. The intensity of the glow does not indicate the amount of blood or other activator present, but only shows the distribution of trace amounts in the area.

Video Luminol

Synthesis

Luminol may be synthesized by reverse-phosphorescence, two-step process. It begins from 3-nitrophthalic acid. First, hydrazine (N₂H₄) is heated with the 3-nitrophthalic acid in a high-boiling solvent such as triethylene glycol and glycerol. An acyl substitution condensation reaction occurs, with loss of water, forming 3-nitrophthalhydrazide. Reduction of the nitro group to an amino group with sodium dithionite (Na₂S₂O₄), via a transient hydroxylamine intermediate, produces luminol. But 3-nitrophthalhydrazide itself has the glow.

The compound was first synthesized in Germany in 1902, but was not named "luminol" until 1934.

Maps Luminol

Chemiluminescence

To exhibit its luminescence, the luminol must be activated with an oxidant. Usually, a solution containing hydrogen peroxide (H₂O₂) and hydroxide ions in water is the activator. In the presence of a catalyst such as an iron or periodate compound, the hydrogen peroxide decomposes to form oxygen and water:

2 H₂O₂ -> O₂ + 2 H₂O

H₂O₂ + KIO₄ -> KIO₃ + O₂ + H₂O

Laboratory settings often use potassium ferricyanide or potassium periodate for the catalyst. In the forensic detection of blood, the catalyst is the iron present in haemoglobin. Enzymes in a variety of biological systems may also catalyse the decomposition of hydrogen peroxide.

Luminol reacts with the hydroxide ion, forming a dianion. The oxygen produced from the hydrogen peroxide then reacts with the luminol dianion. The product of this reaction--an unstable organic peroxide--is made by the loss of a nitrogen molecule, the change of electrons from excited state to ground state, and the emission of energy as a photon. This emission produces the blue glow.

src: pre00.deviantart.net

Use by crime scene investigators

History

In 1928, German chemist H. O. Albrecht found that blood, among other substances, enhanced the luminescence of luminol in an alkaline solution of hydrogen peroxide. In 1936, Karl Gleu and Karl Pfannstiel confirmed this enhancement in the presence of haematin, a component of blood. In 1937, German forensic scientist Walter Specht made extensive studies of luminol's application to the detection of blood at crime scenes. In 1939, San Francisco pathologists Frederick Proescher and A. M. Moody made three important observations about luminol:

1. although the test is presumptive, large areas of suspected material can be examined rapidly;
2. dried and decomposed blood gave a stronger and more lasting reaction than fresh blood; and
3. if the luminescence disappears, it may be reproduced by the application of a fresh luminol-hydrogen peroxide solution; dried bloodstains may thus be made luminescent repeatedly.

Theory

Crime scene investigators use luminol to find traces of blood, even if someone has cleaned or removed it. The investigator sprays a solution of luminol and the oxidant. The iron in blood catalyses the luminescence. The amount of catalyst necessary to cause the reaction is very small relative to the amount of luminol, allowing detection of even trace amounts of blood. The blue glow lasts for about 30 seconds per application. Detecting the glow requires a fairly dark room. Any glow detected may be documented by a long-exposure photograph.

Drawbacks

Luminol has drawbacks that can limit its use in a crime scene investigation:

• Luminol chemiluminescence can also be triggered by a number of substances such as copper or copper-containing chemical compounds, and certain bleaches. As a result, if someone cleans a crime scene thoroughly with a bleach solution, residual cleaner makes the entire crime scene produce the typical blue glow, which effectively camouflages organic evidence such as blood.
• Horseradish sauce, via the enzyme horseradish peroxidase, catalyses the oxidation of luminol, emitting light at 428 nm (blue in the visible spectrum), which may result in a false positive.
• Luminol can detect the small amount of blood present in urine, and can be distorted if animals' urine is present in the room being tested.
• Luminol reacts with faecal matter, causing the same glow as if it were blood.
• Luminol's presence may prevent other tests from being performed on a piece of evidence. However, it has been shown that DNA can be successfully extracted from samples treated with luminol reagent.
• Excessive smoke in an enclosed space--e.g., a car that someone frequently smokes in--can cause positive results with Luminol.

src: www.amandaknoxcase.com

Related molecules

• Luminol: 5-amino-2,3-dihydro-1,4-phthalazinedione ; 3-amino-phthalhydrazide ; 1,4-phthalazinedione, 5-amino-2,3-dihydro ; CAS: [521-31-3]
  C₈H₇N₃O₂ -- MW: 177.16
  ?_abs (in 0.1 N NaOH) ?_max 1 : 347 nm & ?_max 2 : 300 nm; EC (at ?_max 1): 7650 L/mol × cm
  ?_abs / ?_em (MeOH): 355/413 nm
• Luminol, sodium salt: sodium 3-amino-phthalhydrazide; CAS: [20666-12-0]
  C₈H₆N₃O₂Na -- MW: 199.12
• Luminol hemihydrate: a hydrate of sodium 3-amino-phthalhydrazide; CAS: [206658-90-4]
  C₈H₆N₃O₂Na·H₂O -- MW: 217.16
• Luminol hydrochloride: 3-amino-phthalhydrazide hydrochloride; CAS: [74165-64-3]
  C₈H₇N₃O₂ · HCl -- MW: 213.62
• Isoluminol: 4-aminophthalhydrazide; CAS: [3682-14-1]
  C₈H₇N₃O₂ - MW: 117.16 (Xi)
• Isoluminol monohydrate: 4-aminophthalhydrazide monohydrate
  C₈H₇N₃O₂ · H₂O -- MW: 195.15
• Isoluminol ABEI: 4-aminophthalhydrazide monohydrate; CAS: [66612-29-1]

src: images-na.ssl-images-amazon.com

See also

• Fluorescein
• Diphenyl oxalate

src: previews.123rf.com

References

src: www.sciencecompany.com

External links

• HowStuffWorks "How Luminol Works"
• Luminol demonstration in Turin

Source of the article : Wikipedia